NZD$3,000 + GST

With the Nano HD recorder added you have HD Broadcast quality images on a budget. Shoot high data rate images good for cinema using the full range of the F3′s sensor.

email: david@cameraworks.co.nz

The camera comes with a Cineroid Metal EVF  + Convergent Design Nano HD recorder. It is built onto a mount for 15mm mounting at rear with a v lock battery plate for powering camera, nano and evf off one source. Cables included. Or remove the Nano + mount and shoot with F3 body only.A very versatile camera package . Photos tell the story.

This camera has been used only by professionals. Has been a great super reliable workhorse and still is. Has shot TV drama’s ( Girl Vs Boy S1 & 2 ) , commercials and a feature film ( Kiwi Flyer -  http://www.kiwiflyerthemovie.co.nz/ )  amongst doco/s and corporates with never a fault.

Condition:

• Cosmetic: 6.5/10
• Function: 9.5/10   Works as it should, nothing technically faulty (see below) .
• Used so has good signs of normal use and wear.

Includes:

• Sony PMW-F3 camera body
• Sony FZ -Nikon lens mount
• Sony FZ – PL mount
• Cineroid EVF4 Metal viewfinder + mounting arm
• Cineroid EVF d-tap power cable  + battery plate.
• Convergent Design Nano HD recorder
• V-lock battery mount/Nano recorder bracket mount
• Berkey top plate
• Element Technica Bottom plate/shoulder mount / 15mm rail
• 2 x 32GB SxS cards
• S-log Key
• 4 x Lexar 32GB CF cards ( for Nano)
• 2 x Delkin 16GB CF cards ( for Nano)
• CF Card reader
• All cables required
• Original Camera packaging box
• Hours:2230H

Faults:

• ON camera Mic mount broken.
• A small cosmetic damage just under camera by White Balance button. Cosmetic only. Got too close to a candle during a shoot.
• Rubber under camera handle comes off.

We have 2 x PMW-200 available. Both same specs/condition.

Amazing, fantastic reliable true HD Broadcast Quality cameras with superb pictures. Good in low light. Lots of functions, settings. Fully Manual or fully auto.These are cameras came after the legendary EX1 and did not dissapoint. Still used today for HD doc’s and even some cinema doco’s.

email: david@cameraworks.co.nz

Camera Specs: http://pro.sony.co.nz/pro/product/PMW-200/

Condition:

• Visually/cosmetically 8.5/10
• Function/Working 10/10     ( ie: no faults, all works as when new)
• Lens: 10/10  No marks or scratches.  Has lens protective UV filter on
• Typical signs of careful use / wearing
• Hours: 626H
• Note: Small plastic audio dial cover missing. Not needed. Came off as soundies always put tape over it anyway.

Kit Includes:

• Sony PMW-200 camera
• 3 x BPU batteies
• 1 x SWIT 2 bay BPU battery charger/ Power supply
• 3 x 32GB SxS1 cards
• New Sony SD card adaptor   for XDcamEX ( so you can use suitable SD cards as well)
• Sony SxS Card reader
• Sony PMW-200 xlr camera mic
• Remote Control
• Camrade pmw-200 wet weather cover
• In-camera Mic fluffy
• Original Sony PMW-200 box

Optional Extra:

• Storm  iM2720 Case $250.00
• Used/signs of use but 100% functionality.
• Note it does not have proper foam fittings.

Storm Case NOT INCLUDED unless option taken.

We have 2 x PMW-200 available. Both same specs/condition.

Amazing, fantastic reliable true HD Broadcast Quality cameras with superb pictures. Good in low light. Lots of functions, settings. Fully Manual or fully auto.These are cameras came after the legendary EX1 and did not dissapoint. Still used today for HD doc’s and even some cinema doco’s.

email: david@cameraworks.co.nz

Camera Specs: http://pro.sony.co.nz/pro/product/PMW-200/

Condition:

• Visually/cosmetically 8.5/10
• Function/Working 10/10     ( ie: no faults, all works as when new)
• Lens: 10/10  No marks or scratches.  Has lens protective UV filter on
• Typical signs of careful use / wearing
• Hours: 392H
• Note: Small plastic audio dial cover missing. Not needed. Came off as soundies always put tape over it anyway.

Kit Includes:

• Sony PMW-200 camera
• 3 x BPU batteies
• 1 x SWIT 2 bay BPU battery charger/ Power supply
• 3 x 32GB SxS1 cards
• New Sony SD card adaptor   for XDcamEX ( so you can use suitable SD cards as well)
• Sony SxS Card reader
• Sony PMW-200 xlr camera mic
• Remote Control
• Camrade pmw-200 wet weather cover
• In-camera Mic fluffy
• Original Sony PMW-200 box

Optional Extra:

• Storm  iM2720 Case $250.00
• Used/signs of use but 100% functionality.
• Note it does not have proper foam fittings.

Storm Case NOT INCLUDED unless option taken.

email:  david@cameraworks.co.nz

Condition:

• Visually/ Cosmetically   6/10
• Functionality/working  10/10   (No faults)
• Works 100% as when new. (No Faults)
• Lens:  A new lens replaced about 3 years ago. No scratches or mold etc. Has protective UV filter on lens.
• Def signs of use / normal wear / rubbing etc.
• Photos tell it all.
• Solid work horse of a camera still producing great images.
• Light weight , compact, super reliable.
• Hours: 1779H

Kit Includes:

• Sony PMW-EX1 camera
• 3 x BPU batteries ( 3rd party-powered via 12v plug)
• 3 x 16gb SxS card
• 1 x 8gb   SxS card
• Sony 1x bay  BPU battery charger
• Petrol Rain Cover
• Cables
• Sony EX1 camera mic
• Berkey Strong Base plate
• Westside shoulder rig kit
• Original Sony Box

Optional Extra:

• Used Pelican case that fits the kit:  Additional $150.00
• Note : no proper foam  cut out in the  case. But does the job.

If you’re  looking at this you probably know the camera.

If you need the specs go here:  http://www.pro.sony.eu/pro/lang/en/eu/product/broadcast-products-camcorders-xdcam/pmw-ex1/specifications/

Note Pelican Case Not included unless optional extra chosen.

$370.00

Suits Sony Ex1, PMW200 ans similar cameras with same lens front.

Email: david@cameraworks.co.nz

Specs: https://pro.sony.com/bbsc/ssr/product-VCLEX0877/

List Price USD$570

Condition:

• Cosmetically 9/10   Glass perfect
• Function 10/10      Works as new
• Used , in very good condition

Includes:

• Sony VCL-EX0877 Wide Angle Adaptor  / 0.8 x wide convertor
• Front lens cap
• Rear Lens cap

SOLD–NO LONGER AVAILABLE

For Sale: Used but loved Glidecam X-22 Steadycam rig.

Easily handles: Alexa Mini , Red Epic, Sony F3 , Sony F5/55 , XDcamHD 700/800 etc

• Condition: Very good  8/10
• Operation: Works like new 10/10   ( has no faults )
• Has had little use but will show minor signs of careful use
• Power/video cables run up inside centre post
• With suitable adpator can rig gimbals to this for amazing gimbal  steadycam type shots.

Kit Includes:

• Glidecam X-22 vest/harness
• X-22 Spring Arm system
• X-22 Sled
• Hd-docking bracket
• 7″ SD LCD monitor
• 2 x 95wh V-lock battery power
• 1 x Light Stand for docking Sled with Sand Bag

The X-22 is a truly professional camera stabilisation system for stunning results in camera movement/stability. Suited to cameras up to 13kg such as Sony/Panasonic camcorders ( pdw-700/800, Varicam, Sony F3 in full prod mode, Sony ex1/3 with Letus etc). We can supply you a list of local operators trained on the X-22 system or Steadicam trained, or if you already have Glidecam/Steadicam experience then its for you. Amazing value for drama, tvc, docos, short films, music videos, tv features etc.No need for a specialist operator if you or your dop has the experience.

This is  a superb system and the market leader for a reason.

Glidecam X-10 camera Stabilisation system

$1750.00 Incl Gst

Delivery NZ Wide $100

sales@cameraworks.co.nz

• Glidecam Smooth Shooter vest/harness
• X-10 Spring Arm system
• HD4000 Sled
• HD docking bracket
• Lo Mode kit
• weights/accessories
• Light Stand/Sand Bag for Docking.
• Suits up to 6-7kg cameras/rigs.
• INCLUDES Large Pelican Case

This is so easy to learn to use and does wonders for amazing tracking, moving shots . Esp good for corporates, docos , short films , music vid’s etc. So much prod value.

The ultimate mid range camera stabilisation system. This is a step up from the Smooth Shooter , with twin spring arms for super smooth gliding moves. It is the industry leader in this range.  Ideal for small productions as you do not need a specialist operator so it is budget friendly , but your production value will excel.

Suited to heavier Hd-dslr , Canon C300 , BM 2.5 and 4k , Sony Fs5 , Sony FS7 etc .

**********Images Coming

**** SOLD***

Used / 2nd hand Glidecam HD-2000 kit

$650.00

A comprehensive kit. Good , solid , reliable Glidecam HD-2000 kit. These are very robust.
Performs fully as when new. Glidecams are built so well with quality materials in the USA that they last forever . Most important here is the bearings which do not wear down so the smoothness of operating is as when it was new, just it looks like it has a few stories to tell.

Email : david@cameraworks.co.nz

Condition:

• Cosmetic  6.5-7 /10 , Yes has signs of use and lots of fun.
• Function  9.5/10  Works as it should and runs as smooth as day 1.
• Clear signs of use. Most visible is paint missing off centre post. This is just paint and purely cosmetic only.

Includes:

• Glidecam HD-2000
• Full compliment of counter weights
• Glidecam Wrist Brace ( Gives added support and much more stamina when operating as moves strain form wrist to forearm which is much stronger)
• Glidecam Docking bracket ( us eon a light stand for mounting your HD-2000 between shots.
• Case

Check photos.

****SOLD***

Used/2nd Hand Glidecam 4000pro

$270.00

Almost a retro collectors item now.

Still performs as on day one and same as all newer model glidecams as the secret is in the gimbal/bearings which are all the same. High quality, sealed , well built, robust .The 4000pro is so solid and tough it can take a beating.

Email: david@cameraworks.co.nz

Condition:

• Cosmetic  5/10 Good signs of use .
• Function: 9/10 Still performs and functions as it should from new
• Def signs of use etc. Check photos.

Includes:

• Glidecam 400pro
• All weights
• Case

NZ$2100.00  incl GST

sales@cameraworks.co.nz

Kit Includes:
* PMW-EX30
* Dvanz Mounting Bracket( Used to mount under a shelf on vid split trolleys etc)
* 110/240v – 12V power supply
* 4 x 32GB delkin SD cards
* 3 x SD-SxS Card adapters
* D-tap to XLR and Sony EX30 power cable.
* Original box/packaging
* Original manual / CD

**********************************

* Item is located in and will ship from New Zealand

* Price Includes shipping to UK/USA/Europe

* Excellent condition.Selling as surplus to requirements as we’re down sizing our vid split gear.

* Buyer is responsible for their local taxes/import duties etc.
* Buyer is responsible for determining if this meets their technical requirements suits their needs.

Please check the photos which accurately portray the item.

Arri Lite 2kw tungsten light

Often referred to as a Blonde although the original “blonde” was the Ianebeam 2kw light. However not many survived and were replaced by the better Arri Lite. Fantastic powerful 2000w tungsten light. Great for bouncing to give ambient light in a bigger space or put through a silk or diff frame for bigger gorgeous soft halogen light source. Bigger is actually better for beauty lighting.

Email: david@cameraworks.co.nz

Condition:

• Cosmetic  6.5/10  ( because some heat paint peeling on barn door–does not effect performance)
• Function 9.5/10
• Good used condition
• Signs of use and wear from std use

Includes:

• Arri Lite 2kw light
• 2kw bulb
• Barn Doors
• Power cable with inline on/off switch

SOLD

Ianebeam Redhead 800w light

The original Redhead. Nothing comes close to the quality, robustness though many have tried to copy it.

Selling as excess to requirements. Fantastic general purpose light still used on film sets today.Bounced off  a ceiling for general ambience on a doco shoot, bounced off a poly board for gorgeous soft halogen light.

Email: david@cameraworks.co.nz

Condition:

• Cosmetic: 7/10
• Function: 10/10   ie: Nothing faulty
• Usual signs of use/wearing
• Good condition
• Works fully
• Totally functional

Includes:

• Redhead 800w light
• Barn doors
• Wire scrim bulb protector
• On/Off Switch inline with power cord

Punchy 650 fresnel light. Great for putting thru a diff frame or a back light  or for a hard edge light shape.

Solidly built , fully spec’d . Pretty much an Arri copy.

Email: david@cameraworks.co.nz

Condition:

• Cosmetic 8/10
• Function 9.5/10
• Good condition

Includes:

• Vect 650w Fresnel housing
• 650w bulb
• Barn doors
• Power cable with inline power switch.

Superb fresnel lamp , small in size , great for small key or fill light and perfect fir back lights or smaller hard edge light shape.Good for travel. Fresnel lens ,means a good focusable punchy output source.

Still very popular in lighting trucks as such a versatile lamp for its size. Solid build , basiclly an Arri copy.

Email: david@cameraworks.co.nz

Condition:

• Cosmetic  8/10
• Function 9.5/10  , Works fully as should
• Good condition
• Expected usual wear/marks from careful use

Includes:

• Vect 300w Fresnel housing
• 300w bulb
• Barn doors
• Power cord with inline on/off switch

$322.00 incl gst

sales@cameraworks.co.nz

Normal signs of standard use , good condition.

• Dimmable

• 2x  Osram True Tungsten 3200 flouro bulbs  ( same as Kinoflo Diva)

• Bright soft light

• Silver reflector barn doors throw even more light out.

• Solid Robust Metal housing

• 240v power lead with in-line switch

• Kinoflo Flozier ( for diffusion)

• 1 x extra Osram 3200k  bulb

• 1 x extra Osram 5600k  bulb

Note Osram true colour bulbs are about $50 each. So you have $200 worth of bulbs here alone plus the genuine Kino Flozier is about $120

$290.00 ( Incl GST)

Buy with Zacuto Z-riser  and get 15% off both.

http://www.cameraworks.co.nz/sales/zacuto-z-riser-230/

***Free Delivery NZ wide***

Used but good condition Signs of wear and use as would expect with

cameras being mounted on it and this onto tripods etc, but it is solid,

well built Zacuto USA gear , functions , works properly.

To buy New costs over  $730.00.

Includes:

• Zacuto Z-UB3 base plate
• 2 x 12″ aluminium rods
• Bottom mounting sliding screw thread
• Top mounting sliding screw thread

The Top Plate is adjustable up/down to suit various cameras, matte boxes, follow focus units etc. Suits most cameras. This is the tried and true  most favoured base plate world wide  to build your camera rig from.

$230 incl gst

Buy with Universal Base Plate Z-UB3 and get 15% off both.

http://www.cameraworks.co.nz/sales/zacuto-base-plate-z-ub3/

Used, shows signs of std normal use. Works perfectly . Super strong, fantastic quality Zacuto gear is made in USA .

An adaptable Riser for 15mm rail systems.

Suits rigs  where you need more height for matte box etc to match camera height.

Matches very well to the Zacuto Universal base plate.

* Zacuto Z-riser

* 2 x 4′ threaded 15mm rails

Note: Images show Z-Riser  with Zacuto Universal Base Plate for example only. Base Plate NOT Included.

All in excellent condition.

sales@cameraworks.co.nz

4×4

$160.00 each

* Tiffen ND 0.9 Soft Edge grad

* Tiffen 81EF

*Tiffen 1/8 promist          Sold

*Tiffen 1/4 promist

*Tiffen 1/8 Warm Promist

4×5.65

*Tiffen Sunset Grad #2  ( Vertical–suits 4×4 matte boxes with suitable tray)  $190.00

*Redrock Pola  $120.00

*Redrock ND 0.6  $120.00

*Tiffen ND 0.6 Soft Edge Grad   ( Vertical–suits 4×4 matte boxes with suitable tray) $190.00

*Tiffen ND 0.6 Hard Edge Grad ( Vertical–suits 4×4 matte boxes with suitable tray) $190.00

SOLD

Zacuto Z-finder
$130.oo incl gst

+ $17 courier NZ wide or collect form Central Auckland

Sorry can not remember which model. An early version for Canon 5D’s etc.

Click on frame dimensions in photos so measure up your screen.

* Z Finder Loupe
* 2 x frames
* Neck strap
* Loupe cap
* Spare rubber eye cup

Note frames are used so need some sticky tape added to mount them to your dslr screen.
Easy click on/off of the Z-finder to the mounting frames.